On June 24, 2026, CsTeC launched the LubeSeal 636G deep-water high-temperature and high-pressure self-mold stick packing product. The LubeSeal 636G deep-water high-temperature and high-pressure self-mold stick packing is a clean, odorless, and flexible gasket product used for packing the stuffing box. The LubeSeal 636G deep-water high-temperature and high-pressure self-mold stick packing is made of LIQUILON components and can continue to seal and lubricate even after the conventional gasket fails. The LubeSeal 636G deep-water high-temperature and high-pressure self-mold stick packing can repair scratched and dented shafts and can reduce wear. Regardless of the size of the stuffing box, the LubeSeal 636G deep-water high-temperature and high-pressure self-mold stick packing can fit the space between the stuffing box and the shaft, reducing wear through this self-pressing method. The LubeSeal 636G deep-water high-temperature and high-pressure self-mold stick packing is highly recommended for use in situations where equipment shutdown leads to dangerous conditions. The LubeSeal 636G deep-water high-temperature and high-pressure self-mold stick packing is usually used as a supplement after conventional gasket wear or placed between the conventional gasket and the shaft. The operating temperature range of the LubeSeal 636G deep-water high-temperature and high-pressure self-mold stick packing is 0° to >400°F (>204°C), and the rated working pressure is 10,000 psi. The LubeSeal 636G deep-water high-temperature and high-pressure self-mold stick packing is not affected by acidic substances, oil stains, corrosives, and common solvents. The LubeSeal 636G deep-water high-temperature and high-pressure self-mold stick packing can be used on shaft surfaces with rotational speeds up to 1000 fpm. The installation of the LubeSeal 636G deep-water high-temperature and high-pressure self-mold stick packing is very simple; it can be installed as a whole or cut into several sections if the stuffing box space is narrow. The LubeSeal 636G deep-water high-temperature and high-pressure self-mold stick packing can be applied to stuffing boxes with or without sleeves, as well as those with high flow pressure or interference fit clearances. Product features and advantages:
※ Moldable
※ Can repair shafts with scratches and dents
※ Installation is convenient
※ Resistant to extreme temperatures and pressures
※ Low friction coefficient
※ Reduces gasket cost as a supplement
※ Operating temperature: up to >400°F (>204°C)
※ Rated working pressure: up to 10,000 psi
※ Shelf life: four years
The Liquid-O-Ring brand was founded in 1958. Since its establishment, it has continuously broken through and grown, currently offering over 1,000 products applicable to various fields including oil and gas, aviation electronics, offshore vessels, automobiles, agricultural machinery, logistics transportation, textile printing and dyeing, medical, new energy, etc., covering more than 130 countries and regions worldwide. As the brand representative of Liquid-O-Ring in China, CsTeC Company collaborates with the manufacturer of Liquid-O-Ring brand products to serve global customers including Fortune 500 oil companies, international oil service companies, and international energy equipment manufacturers, providing customized products and customized solutions that meet various technical requirements such as deep water, ultra-deep water, high temperature, ultra-high temperature, low temperature, ultra-low temperature, high pressure, and ultra-high pressure. Products of the Liquid-O-Ring brand have respectively received honors such as the “Export Star Award” from the President of the United States in 2015, the “Achievement Award for International Trade Development Group” in 2013, and the “Export Star Award” from the President in 2010.
The Classic (Shenzhen) Energy Technology Co., Ltd. (referred to as “CsTeC”) currently has flagship stores for the Liquid-O-Ring brand products on platforms such as Taobao. For details, you can also consult the official website of CsTeC.
CsTeC has sales, technical support and after-sales service teams in Shenzhen, Huizhou and Hong Kong, and also has its own operation service bases. CsTeC has always adhered to the operation philosophy of “Client’s Interest First” and the dual-track operation model of “Online and Offline”. The three operation bases of CsTeC provide customized products, customized technical solutions and customized delivery plans, etc. that meet the business needs of domestic and international customers 24/7/7 days a week. CsTeC team looks forward to every communication and exchange with you, and looks forward to working together with you to create a brighter future together. (2026-06-24)